Jeger Polyurethane Enamel creates a flexible, semi-matt coating with excellent resistance and adhesion to most materials. Very good spreadability ensures a smooth surface and elegant finish. Durable, stain and dirt resistant. Protects surfaces against water. For exterior and interior use.

Substrate preparation

The surface should be dry, clean and stable. Remove damaged (e.g. flaking and cracked) layers of previous paint. Fill in any surface defects. Clean previously painted surfaces of any contaminants that may affect adhesion, e.g. grease stains and rust. Remove any mold and mildew with a suitable preparation.

Product application

Stir the enamel thoroughly before use. Do not dilute with water. Do not mix with other paints. Apply with a brush or roller. Spray application is possible (if necessary, the paint can be diluted with max. 2% water). Apply at temperatures between +8°C and +25°C and a relative humidity of max. 82%. Apply the next coat after at least 2 hours. When using paint from different batches, mix them in a larger container to prevent color differences. Wash painting tools with warm water after use.

Note: Careful use is recommended for the first 10 days.